Tensile Strength
N (Long/Short Term)
Crush Resistance
Long/Short Term
N/100mm
Bending Radius
Static/Dynamic
mm
Application
Long-distance communication and intercity/metropolitan networks: serve as backbone network connection points for high-capacity data transmission.
Power communication: installed on the same poles as power lines, used for monitoring and communication of the power system.
Industrial and fire protection systems: used for data and signal transmission in industrial parks and fire protection systems.
Mountainous and remote areas: uses existing pole infrastructure, offering convenience, speed and cost savings.
Urban and rural areas: suitable for various installation methods, including aerial, duct and direct burial installation, meeting the needs of different geographic environments.
Features
Good mechanical and thermal performance.
High-strength, hydrolysis-resistant loose tube.
Special tube-filling compound ensures essential fiber protection.
Crush resistance and flexibility.
PSP improves moisture resistance.
Two parallel steel wires ensure tensile strength.
Small diameter, light weight and easy installation.
Long delivery lengths available
Application: Self-supporting/Aerial
Optical Characteristics:
Technical Parameters
| G652. | G.655 | 50/125 μm | 62.5/125 μm |
| Attenuation (+20℃) | @850nm | ≤ 3.0 dB/km | ≤ 3.0 dB/km |
| @1300nm | ≤ 1.0 dB/km | ≤ 1.0 dB/km | |
| @1310nm | ≤ 0.36 dB/km | ≤ 0.40 dB/km | |
| @1550nm | ≤ 0.22 dB/km | ≤ 0.23 dB/km | |
| Width de banda (Clase A) | @850nm | ≥ 500 MHz · km | ≥ 200 MHz · km |
| @1300nm | ≥ 1000 MHz · km | ≥ 600 MHz · km | |
| Numerical aperture | 0,200 ± 0,015 NA | 0,275 ± 0,015 NA | |
| Cable cutoff wavelength | ≤ 1260 nm | ≤ 1480 nm | |
Frequently Asked Questions
Q: Is this cable suitable for aerial self-supporting installation?
A: Yes. ADSS cables are designed for self-supporting aerial installation without a messenger wire. Other outdoor cable types (GYTS, GYTA, GYTA53, etc.) suit duct, conduit or direct-buried installation depending on armor and sheath configuration.
Q: What fiber counts and types are available?
A: Typically from 2 to 288 fibers, with G.652D, G.657A1/A2 or G.655 options. Custom fiber counts and specifications can be supplied per project design.
Q: Can armor, sheath and strength members be customized?
A: Yes. Options include steel tape armor (GYTA53/GYTY53), steel wire armor (GYTS), non-armored designs, LSZH or PE sheaths, and different strength member arrangements based on your installation environment.
Q: Are test reports provided with the cable?
A: Yes, every batch is factory tested for fiber attenuation, tensile and sheath performance per relevant ITU-T standards, and test reports can be provided on request.
Q: What certifications do your cables hold?
A: Our production is ISO9001 and ISO14001 certified, and products are CE and RoHS compliant.
