Application
Only suitable for terminal fiber splicing with low splicing precision requirements, very small quantities, and a relatively good construction environment (dust, temperature, altitude).
Features
Six-motor core-alignment fusion splicer with touch screen
Fast splicing in 6 seconds, fast heating in 16 seconds.
4.3-inch color LCD screen
Electrode life: 5000 splices
Multi-function 3-in-1 illuminator.
7800mAh battery, 400 splice-and-heat cycles
Average splice loss: 0.01dB
Real-time discharge correction for stable splicing precision
USB interface, convenient for data download and software update.
Can store 10,000 sets of splice results and 2,000 sets of images.
The silicone protective case is effective against water, drops and vibration.
Small size, easy to carry and transport.
Technical Parameters
| Splicing method: | Active cladding alignment |
| Applicable fibers: | SM(UIT-T G.652 y G.657) / MM(UIT-T G.651) / DS(UIT-T G.653) / NZDS(UIT-T G.655) |
| Compatible fiber/cable: | Indoor flat cable 0.25~3.0mm |
| Fiber holder: | Replaceable |
| Fiber diameter: | Cladding: 80-150μm, coating: 100-1000μm |
| Typical splice loss: | SM: 0,03 dB / MM: 0,01 dB / DS: 0,04 dB / NZDS: 0,04 dB / G.657: 0,03 dB ★ |
| Return Loss: | >>60 dB |
| Splicing time: | Fast SM mode: 6 seconds / average SM: 10 seconds |
| Estimated splice loss: | Available |
| Heating time: | Fast mode 16 seconds (SM G652, 250μm, 40mm sleeve), adjustable |
| Protective sleeve length: | 20 mm, 30 mm, 40 mm, 50 mm, 60 mm |
| Heating programs: | Up to 32 modes |
| Battery: | 7800mAh battery capacity, typically 120 splice-and-heat cycles per charge ★③ |
| Electrode life: | 5000 arcos (reemplazables) |
| Auto start: | Splicing / Heating |
| Automatic arc identification: | Automatic arc calibration based on air pressure and temperature. |
| Result storage: | The latest 10,000 splice records and 2,000 result images |
| Tension test: | 1,96~2,25 N |
| Operating conditions: | Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, maximum wind speed 15 m/s |
| Storage conditions: | 0~95% de humidity relativa, -20~60°C |
| Power supply: | CA 100-240V, CC 9-14V |
| Terminal: | USB 2.0 |
| Peso : | 1.72kg without battery / 2.25kg with battery |
| Size: | 158mm (H) x 132mm (W) x 157mm (D) (including rubber bumper) |
Frequently Asked Questions
Q: What alignment technology is used?
A: Core-alignment models are available for lowest splice loss, as well as clad-alignment models for cost-effective field splicing.
Q: What is the typical splice loss?
A: Typical splice loss is 0.02dB for single-mode and 0.01dB for multi-mode fiber, verified automatically by the built-in arc test after each splice.
Q: How many splices per battery charge?
A: Typically 200–320 splice cycles per full charge depending on the model; the AC adapter is included for continuous operation.
Q: Which fiber types are supported?
A: It supports single-mode (G.652/G.657), multi-mode and DS fiber in 250µm, 900µm, 2.0mm and 3.0mm configurations with the appropriate fiber holders.
Q: What training and after-sales support is provided?
A: We provide operation guidance and videos, spare electrodes and blades, and responsive after-sales technical support by message or remote assistance.
