Application
Only suitable for terminal fiber splicing with low splicing precision requirements, very small quantities, and a relatively good construction environment (dust, temperature, altitude).
Features
Operating requirements, storage environment and power supply of the fusion splicer
Operating temperature: 0℃ to +40℃; extreme temperature: -10℃ to +40℃; operating humidity: below 95% RH (non-condensing); maximum wind speed: 15 m/s
Storage conditions: -20℃ to +60℃ (non-condensing)
Before connecting the power supply, ensure the manufacturer provides the correct voltage and that all safety precautions have been taken.
Do not use the fusion splicer in flammable or explosive environments.
Do not use the fusion splicer in the presence of flammable gases or fumes.
Do not disassemble any part of the fusion splicer without authorization.
Technical Parameters
| Fiber | SM(G.652&G.657), MM(G.651), DS(G.653), NZDS(G.655) |
| Alignment method | Precise core and cladding alignment. |
| Applicable fibers | Any common optical fiber, rubber-insulated fiber and patch cords meeting ITU-T G.651~653, ITU-T G.655 and ITU-T G.657 requirements. |
| Optical fiber diameter | Cladding diameter: 80-150μm; coating diameter: 100-1000μm |
| Cutting length | 5~16mm (coated optical fiber diameter ≤250μm); 10mm (coated optical fiber diameter: 0.25~3mm) |
| Fusion splice consumption (typical value) | 0,02 dB (SMF); 0,01 dB (MMF); 0,04 dB (DSF); 0,04 dB (NZDSF) |
| Return Loss: | >>60 dB |
| Splicing time: | 9S |
| Estimated splice loss: | Available |
| Heating time: | 26S |
| Tensile test | Standard 2N (optional) |
| Fiber optical alignment | Precise alignment; core alignment; cladding alignment. |
| Expansion time | 320 veces/88 veces |
Frequently Asked Questions
Q: What alignment technology is used?
A: Core-alignment models are available for lowest splice loss, as well as clad-alignment models for cost-effective field splicing.
Q: What is the typical splice loss?
A: Typical splice loss is 0.02dB for single-mode and 0.01dB for multi-mode fiber, verified automatically by the built-in arc test after each splice.
Q: How many splices per battery charge?
A: Typically 200–320 splice cycles per full charge depending on the model; the AC adapter is included for continuous operation.
Q: Which fiber types are supported?
A: It supports single-mode (G.652/G.657), multi-mode and DS fiber in 250µm, 900µm, 2.0mm and 3.0mm configurations with the appropriate fiber holders.
Q: What training and after-sales support is provided?
A: We provide operation guidance and videos, spare electrodes and blades, and responsive after-sales technical support by message or remote assistance.
