Application
Universal 4-in-1 illuminator
No accessory change required during online testing, protecting the fibers. Suitable for 0.25/0.9/2.0/3.0mm fiber optic cables.
Features
Wavelength range: 850nm ~ 1650nm. Calibration wavelengths: 850/980/1270/1300/1310/1490/1550/1577/1625/1650nm.
Technical Parameters
| Wavelength range | 800-1700 nm |
| Model detection type | CW, 270 Hz + 5 %, 1000 Hz + 5 %, 2000 Hz + 5 % |
| Detector type | o1mm, InGaAs 2 pieces |
| Fiber-type adapter | Universal for 0.25" (bare fiber), 0.9", 2.0" and 3.0" optical fiber cables |
| Signal direction | Shows indicator arrows for left and right directions. |
| Shows indicator arrows for left and right directions. | -40 dBm-+10 dBm |
| Optical power test range | -70 dBm-+10 dBm (+0.2 dB) |
| Optical power test wavelength | 850 nm-1650 nm |
| Signal frequency range | 270 Hz, 1000 Hz, 2000 Hz |
| Red light test wavelength | 650 nm |
| Red light output power | >30 mW |
| Connector type (battery) | Battery version: 2 AA batteries (1.5V). Rechargeable version: 800mAh polymer battery (3.7V). |
| Operating Temperature (°C) | -10-+60°C |
| Dimensiones (mm) | 243*50*50 mm |
| Peso (g) | 177 g |
Frequently Asked Questions
Q: Can it detect signals on live fiber without interrupting service?
A: Yes, it uses macro-bend detection to check traffic presence and signal direction without cutting, cleaving or opening the fiber.
Q: Which fiber types can be tested?
A: It supports 250µm, 900µm, 2.0mm and 3.0mm coated fiber, in both single-mode and multi-mode.
Q: What wavelengths can it detect?
A: It detects signals at 850, 1300, 1310, 1490 and 1550nm and indicates traffic and direction via LED indicators.
Q: Is a power adapter included for long field sessions?
A: Yes, the device runs on AA batteries with optional AC adapter support for continuous field use.
