The fiber optic identifier is an essential tool for fiber optic maintenance, used for non-destructive identification of working optical fibers. This device can detect signals at any point along single-mode and multi-mode optical fibers.
Suitable for 0.25/0.9/2.0/3.0mm fibers
2.Test sensitivity: -40dBm to 10dBm
3.Easy to carry, no need to replace the chucks
4.LED backlight display, suitable for Various environments without auxiliary
5.Strong light source, strong penetrating power
6.Test distance up to 5km, high stability
The fiber optic identifier is primarily used in optical communication engineering construction, operation and maintenance, and data centers. Without interrupting communication, it non-destructively detects the presence, direction, and modulation tone of optical signals at any point in single-mode or multi-mode optical fibers. Its applications cover critical areas such as fiber optic cable fault detection, trunk line maintenance, fiber optic splice point identification, and broadband network installation in homes.
Wavelength Recognition Range | 800nm to 1700nm |
Signal Recogniton Type | CW, 270Hz + 5%, 1kHz + 5%, 2kHz + 5% |
Detector Type | $ 1mm InGaAs 2 pcs |
Adapted Fiber Type | $0.25mm, $0.9mm, $2.0mm, $3.0mm |
Signal Direction | Left & Right LED |
Optical Power Reading Range | -40dBm~10dBm |
Signal Frequency Range | 270Hz 1kHz,2kHz |
Power Type | Alkaline Battery Type AA*2 |
Operating Temperature Range | -10°C~60°C |
Storage Temperature Range | -25°C~70°C |
Dimension/Weight | 219*45*28mm/ 235g |
VFL Function | |
Power range | 10mW |
Testing distance | 5-8km |
Wavelength | 650nm |
Laser type | LD |
LED light | Support |