High-Tensile 2 Core Outdoor Round FTTH Drop Cable | UV Resistant Aerial Cable
Designed for complex outdoor conduit installations, the round structure provides 360-degree omnidirectional flexibility, significantly reducing friction during pipe pulling. The dual-core configuration offers service redundancy or dual-link access, making it the ideal choice for urban renovation and intricate conduit networks.
Application
Underground micro-conduit installation, urban pipe-network renovation, and dual-service (Data+IPTV) residential connections.
Features
Fiber Type: G.657A1/A2 (Bend-Insensitive)
Structure: Round (Anti-friction)
Strength Member: 1.0mm Steel Wire + 0.45mm FRP
Jacket: Black UV-Resistant PE
The 360° Round Structure eliminates the directional bending limit of flat cables. It is specifically engineered for "difficult pulls" in curved or old narrow pipes where flat cables often get stuck or twisted.
Technical Parameters
| Fiber Count | 1F | 2F | 4/6F | 8F/12F |
| Self-Supporting Strength Member | Solid Steel Wire/Stranded Steel Wire |
| | 1.0mm | 1.2mm |
| Strength Member | FRP/KFRP/ Solid Steel wire 0.45-0.52mm |
| Cable Diameter(mm)Approx | 2.0*5.0(±0.1) | 2.8*6.3(±0.1) |
| Cable weight(kg/km)Approx | 18.5/20 | 19/20.5 | 20/21.5 | 34/35 |
| Tensile Strength Short/ Long Term (N) | 200/100 for steel wire strength member
80/40 for KFRP wire strength member |
| Crush resistance short/long term(N/100mm) | 1000/500 |
| Operating temperature range(°C) | -40°C~+70°C |
Frequently Asked Questions
Q: Can the drop cable be supplied in custom lengths and packaging?
A: Yes. FTTH drop cable is available in custom lengths, typically from 100m to 2,000m per reel or coil, with coil, spool or boxed packaging per your project.
Q: What is the difference between indoor and outdoor drop cable?
A: Outdoor drop cable uses a UV-resistant black PE jacket and a steel wire or FRP strength member for aerial and conduit installation; indoor drop cable uses an LSZH jacket for safety in homes and offices. Dual-purpose versions are also available.
Q: Why is G.657A1/A2 bend-insensitive fiber important?
A: G.657A1/A2 fiber tolerates tight bends (minimum bend radius as low as 7.5–10mm) with negligible loss, making installation around corners, door frames and wall boxes much easier in FTTH last-mile deployment.
Q: What fiber counts are available?
A: 1F, 2F, 4F, 6F, 8F and 12F configurations are available in round or bow-type (flat) structures to cover aerial, duct and indoor routing scenarios.
Q: What is the MOQ and lead time?
A: The MOQ depends on the model and fiber count; it is low and negotiable for standard stock items. Typical production lead time is 7–15 days after confirmation.
